http://www.jtii.com

You’re on solid ground with QUADTRAC® Tractors


Introduction
Engine
Cabs/Controls
Drivetrain
Hitch & Hydraulics
Tracks
Serviceability

Other Topics:
Tracked Vs. Wheeled
Specifications
Approximate Speeds

.

A CLOSER LOOK





Serviceability

OTHER TOPICS




. QuadTrac Tractor

This four-track powerhouse is built from the ground up by Case engineering. It has the advantage of tracks and the maneuverability of a 4WD wheel-type tractor. Best of all, it possesses all the advantages of the legendary STEIGER ® tractor: a rugged chassis, powerful engine, responsive transmission, comfortable cab and more. Much more.

The unique design of the QUADTRAC ® tractor provides improved flotation and traction with minimal compaction, while it gives its operator a superior ride. Here’s how:

Each 30" rubber track provides 68.5 inches of contact with the ground surface. Each track can pivot up and down 10 degrees, allowing the track assembly to follow the ground contour. Because each track assembly works independently, the track remains on the ground. And with the 26 degrees of oscillation between the front and rear of the tractor, operators enjoy a superior ride, while the tractor provides superior flotation and traction. Depending on the tractor’s configuration, soil compaction will be as little as 4.9 to 5.3 pounds per inch!

Even though the QUADTRAC tractor looks very different, it steers like a conventional 4WD tractor. The unit provides a 19.5 ft. turning radius with two distinct advantages over a two track unit.

  • QUADTRAC tractors give you the ability to turn under load—as you turn, the tractor pivots in the middle allowing it to maneuver like a conventional 4WD tractor.
  • Because the unit pivots like a conventional 4WD tractor, you do not need to skid a track to turn, so soil ridging and soil disturbance is minimal.

Maintenance on QUADTRAC tractors is minimized because the track assembly requires no daily maintenance. All pivots operate in lube-for-life bushings; the idlers and rollers operate in sealed tapered bearings, and the track tension is maintained as the operator operates the tractor hydraulic system.

For more information about QUADTRAC® tractors, contact Jones Truck and Implement.

Case Corporation reserves the right to make improvements in design and changes in specifications at any time without notice and without incurring any obligation to install them on units previously sold. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. Your Case IH dealer/distributor will be able to give you details of the products and their specifications available in your area.

QUADTRAC® Tractors | STEIGER® 4WD Tractors

Agricultural Home | Buyer's Guide | Tractors | Top Of This Page


Copyright © 1997, Case Corporation. All rights reserved.
Case, IH and Case IH are registered trademarks of Case Corporation.
This page was created by TheN.E.W.S in cooperation with Case corporation and their dealer Jones Truck & Implement.