2025 Schulte Rotary Cutters Mowers FX-1800
- Year 2025
- Make Schulte
- Model Rotary Cutters Mowers
2025 Schulte Rotary Cutters Mowers FX-1800
2025 Schulte Rotary Cutters Mowers FX-1800
Features may include:
- Our medium duty 15' flex wing, rotary cutter
- A single domed 7 ga continuously welded deck makes this rotary cutter extremely easy to clean, prevents water pooling and rusting and helps shed debris.
- 6.5 ” blade overlap and high blade tip speeds.
- A four gearbox drive line with independent slip clutches. The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260 HP (194kw). The centre and wing boxes have 1 3/4 ” 20 spine input shafts, 2 3/8 ” down shafts and are rated at 225 HP (168kw).
- An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service.
- Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
- Available in 540 or 1000rpm drive.
Engine
Minimum Engine Power
Tractor: 50 HP (37 kW)
Engine Power
Recommended Tractor: 85 HP (63 kW)
PTO
PTO Power, Rated Engine Speed
Tractor: 540 or 1000 rpm
Drivetrain
Gearbox
Divider Rating: 260 HP (194 kw) | Center & Wing Rating: 225 HP (168 kw)
Drive System
Size, Main: Cat.5CV (1000rpm),Cat.6 CV (540 rpm) | Size, Centre and Wings: Category 6
Suspension
Suspension
Rubber gromett 3 puck system
Wheels & Tires
Tires, Rear Specification
Laminate, Aircraft (5 bolt) 22” size
Operational
Operating Speed
Blade Tip Speed: 540 rpm / 1000 rpm | Center: 15980 ft/min (4871 m/min) / 15974 ft/min (4869 m/min) | Wing: 15459 ft/min (4711 m/min) / 15708 ft/min (4788 m/min) | Wing Working Range: 25 o down to 87 o up | Wing Working Range: 25 o down to 87 o up
Chassis
Deck Thickness
7GA (3/16",4.6 mm)
Dimensions
Dimensions
Cutting Capacity: 4" (101.6 mm) | Blade Overlap: 6.5" (165.1 mm) | Output Shaft: 2.38"(60.3 mm) | Side Skirt Depth & Thickness: 13.63" (346 mm) & 1/4” (6.35 mm)
Cutting Width
180 ” (4.57 m)
Overall Width
190 ” (4.83 m)
Overall Length
202 ” (5.13 m)
Transport Width
93” (2.36 m) (Singles on wings) 102" (2.59 m) (Duals on wings)
Transport Height
84" (2.13 m)
Height
Cutting: 1.75" to 16.75" (44.5 mm to 425 mm)
Ground Clearance
14.75" (42.5 mm)
Weights
Weight
5,600 lbs (2540 kg) (Depends on configuration) | Hitch: 1680 lbs (762 kg) (Depends on configuration)